Tuesday, June 9, 2009

Fused Dichroic Glass and Copper Bangles












Well ! That's my 9 year old Katie's favorite word these days and after taking time to look at how long it has been since my last post here on the blog that's the only word I can think of this morning too! Well....... I guess it has been a while, but I'm here now and thought I'd add a few new photos of my latest projects and wish you all a happy summer!

Summer, what a wonderful word! The weather is warm, the grass is green and my girls are on vacation, YAY!!!! I just love summer, early mornings listening to the birds sing there morning songs while my house is still peaceful and quiet. A walk through the dew covered grass to take a look at my growing garden while sipping on a hot cup of fresh coffee and the smell of the fresh air.

Life is good!

I recently had a request from a customer to make a bangle bracelet as a gift for her sister and of course once I got started I couldn't just stop at one so I have made several to add to my etsy shop http://www.etsy.com/shop.php?user_id=5216437 .

I love making these bangles they are just beautiful. Of course I start with a focal of fused dichroic glass that I make in my kiln. The glass is stacked in layers and placed in the kiln for the first firing. I fire my glass around 1500 degrees for about 4 hours and then cool it over night.

This brings the glass to a full fuse and cooling the glass over night anneals the glass and protects it against cracking. It forms a very durable piece of glass that I then shape on the grinder to form the shape. Once I am happy with the shape of the cabochon I change out my grinder bit and use a jewelry bit that cuts the grooves around the outer edge of the cab. After I complete the set of cabs they are all cleaned a final time and placed back into the kiln for a final fire polishing. I fire polish my glass at 1200 degrees , from start to finish this cycle takes about 3 hours and the kiln is cooled again over night.

The groove I cut in the glass creates the perfect channel for wire wrapping and gives me a finished focal piece that is secure with no worries that the glass will slip out. I used 20 gauge copper wire to wrap the cabs and a small dowel gives me perfect rings on the end for adding my bands onto. The triple wrapped loops on each end give the glass balance and makes the finished bracelet more durable.

The bands are made using 14 gauge copper wire that is first rolled through my small rolling mill to be flat. I measure and cut each segment of the band, file the ends smooth and then use metal stamps to add a scroll like pattern. Once I am happy with the design I shape the ends using my pliers and hammer the loops. The bands are then shaped using a mandrel so they fit comfortably around your wrist and they are finished off with hand formed and hammered copper wire claps that simply slide into the loop on the opposite side of the band. Easy to put on, comfortable and extremely durable.

I hope you like them and if your inspired by my design and are able, give it a try, make a few of your own, your going to love the finished product and be amazed at how durable and strong these little beauties are. That's always a concern of mine when I make a product to sell is will it last? and these will last for years.

I have given the bracelets a beautiful aged patina using liver of sulfur and have burnished them by hand using a stainless steel brush that brings out the detail on the band and polishes them to a high shine.

I hope you like them but most of all I hope you have a wonderful day.
If you'd like to see more of my designs feel free to visit my etsy shop where every design is Simply Mine!

9 comments:

Christina Colwell said...

Love the dichroic and copper combination. I drop hints all the time when my husband makes jewelry to use copper.

Nice work.

http://www.christinacolwell.blogspot.com

june said...

Deedee,
hi,love your work I love copper as well.I wondered what sort of mill you have? I'm a 68 yr old & only become interested in jewellery last few years.Want to flatten copper & found your blog,where you mention your mill.I am from Australia.What sort would you recomend.I am not selling jewellery in a big way, mainly all my grand daughters & friends,dont even wear it mtself. So don't want to spend big.even manualy operated would probably be ok for the small amount I do. Look forward to hearing from you.
June

wandering wraith said...

What is the deep blue stone called? Looks like there are tiny trapped stars inside. Beautiful.

Diamonds Los Angeles said...

They are just beautiful. It is the first time i have seen such a beautiful Handcrafted Beaded Jewelry. the beauty of copper bangles bracelet with a fused dichroic glass, its looks stunning.

Gkon Electricals & Electronics Pvt. Ltd. said...

Copper Wire manufacturers – Gkon is one of the renowned Copper Wire Manufacturers in India.

plumbing supplies said...

Copper jewellery has been worn for more than 100 years, mostly for genuine health factors as some believe that it enhances good blood circulation and eases the the signs of joint disease.

double glazing said...

Those bangles are really lovely. I definitely want to have one of those. The designs are simple yet very appealing.

Double Glazing said...

I love your works. You are giving a name for cooper accessories. I'm sure it will give a big impact in the field of accessories.

Sarita said...

Hello
Love your blog. You have some great ideas and beautiful pieces. Have you seen this press release and news article? Blogrower on Typobounty is a new game changing concept and could greatly affect online blogs like yours. You can become a registered hunter (it's free to join) and make money by finding errors on internet websites. Secondly, you can submit your blog on their site and increase your blog readership by allowing hunters to hunt for errors on your website. Imagine huge numbers of hunters reading every word. I just thought you or readers might be interested.For more information please check out the press releases at

http://www.urlwire.com/news/051011.html

or